Industrial Painting Solutions for Plastic Components
Precision coating for plastic parts and components
Painting plastic components requires precise control of atomization, material flow and application parameters. Plastic surfaces are used across a wide range of industries, from automotive and consumer products to furniture, electronics and industrial components, and each application can place different demands on the coating process.
Crescocito develops and manufactures industrial spray equipment and fluid handling solutions for automatic and robotic painting of plastic components.
Our solutions are designed to help manufacturers achieve consistent finish quality, reliable production and efficient material use while reducing overspray and unnecessary paint consumption.
By combining engineering, manufacturing and application knowledge, Crescocito can support the complete painting process – from paint supply and pressure control to atomization and application.
Applications for plastic painting
Plastic components vary considerably in size, geometry, surface characteristics and coating requirements.
Crescocito equipment can be used for a wide range of industrial plastic painting applications, including:
- Automotive plastic components
- Interior automotive parts
- Exterior automotive components
- Consumer products
- Furniture components
- Electrical and electronic housings
- Household products
- Industrial plastic components
- Molded plastic parts
- Decorative plastic products
- Technical plastic components
- Automated and robotic plastic painting
The optimal application solution depends on the coating material, component geometry, production volume and required surface finish.
CLA 80
The CLA 80 automatic Low Pressure spray gun is a strong choice for plastic painting applications where high finish quality, precise atomization and repeatable spray performance are important.
Its compact design makes it particularly suitable for automated and robotic installations.
Typical applications can include:
- Automotive plastic parts
- Decorative plastic components
- Consumer products
- Furniture components
- Industrial plastic parts
CLA 30
The CLA 30 series provides additional possibilities for automatic Low Pressure coating applications.
Depending on the configuration, it can be used where compact installation, precise application and controlled atomization are required.
CLA 20 RPC
The CLA 20 RPC is another alternative for applications requiring controlled automatic spray application and flexible integration into production equipment.
The most suitable spray gun should always be selected according to coating material, required spray pattern, production speed and component geometry.
CHA 250
The CHA 250 automatic Airless spray gun is suitable for applications requiring higher material flow or where the coating characteristics favour Airless atomization.
It can be integrated into automated systems and used for efficient application of suitable coatings onto larger plastic components.
CAA 210
The CAA 210 Air Assist automatic spray gun combines hydraulic atomization with controlled assisting air.
This can provide an effective combination of material transfer, spray control and finish quality for suitable plastic coating applications.
Paint pressure regulators
Crescocito paint pressure regulators help provide stable and accurate material pressure close to the spray gun.
Consistent pressure contributes to repeatable material flow and improved process stability.
Filters
Reliable filtration helps protect application equipment and maintain stable production.
Crescocito paint filters can be integrated into the fluid system according to the coating material and application requirements.
Mounting plates and gun adapters
Crescocito mounting plates and single, dual and triple gun adapters make it possible to create compact multi-gun configurations.
These solutions can be particularly useful when painting plastic components with complex geometries or when several spray directions are required.
Colour Changers
For production lines handling multiple colours, Crescocito colour changers can help create a compact and efficient material switching system.
Reduced internal volumes can help minimize paint and cleaning material losses during colour changes.
Choosing the right spray technology
There is no single spray gun or technology that is ideal for every plastic component.
The correct solution depends on the complete application.
Important factors include:
- Plastic component geometry
- Coating material
- Material viscosity
- Required surface finish
- Production volume
- Production speed
- Required film thickness
- Level of automation
- Available installation space
- Colour change frequency
Crescocito can help evaluate these factors and identify the most suitable combination of spray technology and fluid handling equipment.
Engineering + Manufacturing + Application Knowledge
Crescocito is more than a manufacturer of automatic spray guns.
We combine engineering, in-house manufacturing and application knowledge to help customers improve their industrial painting processes.
Instead of looking only at the spray gun, we can evaluate the complete application:
Paint supply → Pressure control → Colour changing → Spray equipment → Atomization → Robot movement → Finished component
For plastic painting applications, our engineers can help address questions such as:
- Which spray technology should we use?
- How can we improve finish quality?
- How can we reduce paint consumption?
- How can we reduce overspray?
- How should the spray guns be positioned?
- Can the process be automated or robotized?
- How can we achieve more consistent film thickness?
- How can colour changes become faster?
- How can the existing painting line be optimized?
This complete-process approach can help identify improvements that may not be visible when individual components are evaluated separately.
Test and optimize your plastic painting application
Testing can be valuable when developing a new coating process or improving an existing production line.
Different spray technologies, nozzle configurations, paint pressures, spray patterns and robot parameters can be evaluated before changes are implemented in production.
The objective is to find the best balance between:
Finish Quality – Paint Consumption – Transfer Efficiency – Production Speed – Process Stability
Swedish engineering for industrial plastic painting
Crescocito develops and manufactures industrial spray equipment in Sweden for customers, manufacturers and system integrators around the world.
Our automatic spray guns, pressure regulators, colour changers and fluid handling equipment can be combined into complete application solutions for demanding automated production environments.
Whether the goal is to improve surface quality, reduce paint consumption, increase production reliability or automate the painting of complex plastic components, Crescocito can help develop the right application solution
Improve your plastic painting process
Are you looking to reduce paint consumption, improve surface quality, automate your painting process or achieve more consistent results?
Crescocito can help evaluate your coating material, component geometry and existing painting process to identify opportunities for improvement.